Setting the beep – Leica Geosystems T100 User Manual
Page 31
31
T105/T110-1.3.0en
Configuration
8
12
15
1
1
The setting of the beep can be
changed via the configuration menu
or directly via the quick setting.
Possible settings:
Beep is switched ON.
Beep is switched OFF.
Beep is switched ON and
sounds at right angles.
Switch on beep:
1. Scroll to symbol
/
/
2. Select "Beep ON"
with
.
3. Confirm selection with
.
Switch off beep:
Same procedure but select
.
Switch on 90° beep for right angle
stake-outs:
Same procedure but select
.
The beep sounds at right angles (0°,
90°, 180°, 270° or 0, 100, 200, 300
gon).
The beep is an acoustic signal after
each key stroke or at right angles.
Setting the beep
Example:
From 95.0 to 99.5 gon (or from 105.0
to 100.5 gon) a "Fast beep" and from
99.5 to 99.995 gon (or from 100.5 to
100.005 gon) a "Permanent beep"
sounds.
T100Z27
1 No beep
2 Fast beep
3 Permanent beep
1
1
1
2
2
3
3