Setting hz-direction, Setting hz-circle, V-angle display – Leica Geosystems T100 User Manual
Page 21: Clockwise, Counterclockwise, Hz-circle, Hz-direction, Set hz, V-angle
21
T105/T110-1.3.0en
Simple measurements
8
12
Setting of Hz-circle.
Back to measuring menu
without modification.
Setting of Hz-orientation.
Back to measuring menu
without modification.
Setting Hz-direction
Set Hz to 0°00'00"
• Aim on orientation point.
• Set Hz-angle with
.
Back to measuring menu
automatically.
Set any Hz-angle
• Turn telescope to the desired Hz-
angle.
• Hold indicated Hz-angle with
.
• Aim on orientation point.
• Set Hz-angle with
.
Setting Hz-circle
Set Hz to "Clockwise angle
measurement".
Set Hz to "Counterclockwise
angle measurement".
Setting is accepted
immediately.
V-angle display
The indication of the V-angle can be
directly switched on/off with
.
Switch off V-angle display.
Switch on V-angle display.
Display of angle according to
configuration setting.
Switch on V-angle dispaly.
Indication of angle in "+/-%
inclination" (valid range -
300.00% to + 300.00 %).
H:123
°
12'50"
H: 0
°
00'00"
H:123
°
12'50"
V: 90
°
00'30"