Leica Geosystems T100 - Manual (Page 38)

38 Configuration T105/T110-1.3.0en
8
12
15
2. Select desired option with
3. Confirm setting with
Possible settings:
The line-of-sight error
correction is switched ON.
The line-of-sight error
correction is switched OFF.
Switching on/off line-of-sight error correction
By measuring in both faces
the line-of-sight error is
eliminated.
Find more information about
the Hz-collimation in chapter
"Determining instrument
errors".
The T105/T110 can correct the line-
of-sight error (Hz-collimation)
automatically. This setting can only
be changed via the configuration
menu.
If option "Line-of-sight error
correction ON" is active, each
measured Hz-angle is corrected
(depending on V-angle).
For normal operation the line-of-sight
error correction remains switched on.
1. Scroll to symbol
C
/
C
C
C C
C
C