Switching on/off compensator – Leica Geosystems T100 User Manual
Page 37
37
T105/T110-1.3.0en
Configuration
8
12
15
1
1
The compensator normaly remains
switched on.
If the instrument is used on an
unstable base (e.g. shaking platform,
ship, etc.) the compensator must
be switched off.
This avoids the compensator drifting
out of it's measuring range and
interupting the measuring process by
indicating an error.
The working range of the
compensator is at 5'24" (±0.1gon).
This horizontal accuracy can is easily
obtained with the electronic level.
Switching on/off compensator
1. Scroll to symbol
/
Possible settings:
The compensator is switched
ON. V-angles relate to the
plumb line.
The compensator is switched
OFF. V-angles relate to the
standing axis.
The compensator setting
remains active even after the
instrument is switched off.
2. Select desired option with
3. Confirm setting with
.