Leica Geosystems T100 - Manual (Page 39)

39
T105/T110-1.3.0en Safety directions
8
12
15
31
Safety Directions
The following directions should
enable the person responsible for the
T105/T110, and the person who
actually uses the instrument, to
anticipate and avoid operational
hazards.
The person responsible for the
instrument must ensure that all users
understand these directions and
adhere to them.
Permitted uses
The electronic total stations are
intended to the following applications:
• Measuring horizontal and vertical
angles
• Visualising the standing axis (with
laser plummet)
Intended use of instrument
Adverse uses
• Use of the total station without
previous instruction
• Use outside of the intended limits
• Disabling safety systems
• Removal of hazard notices
• Opening the instrument using tools
(screwdriver, etc.), unless this is
specifically permitted for certain
functions
• Modification or conversion of the
instrument
• Use after misappropriation
• Use with accessories from other
manufacturers without the prior ex-
press approval of Leica Geosys-
tems
• Aiming directly into the sun
• Inadequate safeguards at the
surreying site (e.g. when
measuring on roads, etc.)