Leica Geosystems RCS1100 Series - Manual (Page 14)

14 Preparation, Setting up RCS1100-1.2.0en
The battery for the RCS1100 fits into
a compartment on the underside of
the instrument. Push it fully against
the side opposite to the catch and
then click it into position on the same
side as the catch.
Inserting and removing batteries
To charge the battery, use the
GKL111 or GKL122 charger as
described in the instructions
provided with that charger.
The chargers are not
intended for outdoor use.
Adhere to the safety directions.
Charging batteries
To remove the battery, hold it to
prevent it from falling and pull out the
lever of the catch by about 2mm.
Tcs1
1z01
T100Z74
Tcs1
1z02