Leica Geosystems RCS1100 Series - Manual (Page 21)

21
RCS1100-1.2.0en Operation
6
7
8
15
PowerSearch
Activates the
Hz/V mode.
In Hz/V mode, the TPS1100 can be
turned by set angle values.
RCS\ HZ/V
Set relative Hz- and V-angles
Hz/∆ ∆∆ ∆∆Hz : 0°00'00"
V/∆ ∆∆ ∆∆V : 0°00'00"
CONT ABS
QUIT
Aim towards the TPS1100 with the
compass from the prism:
• To lock the prism for the first time
• if you lose the LOCK setting.
Read off from the compass:
• the Hz angle indicated by the
compass needle (0° to 360°)
• the V angle (+90° to -90°, horizon-
tal = 0°)
and enter these values in the RCS
1100.
Quits the compass mode and
starts the search mode.
Compass, continued
Starts the quick prism
search using
PowerSearch. This function is only
available on instruments equipped
with the optional PowerSearch
sensor.
Two different search modes are
available. If no working area has
been defined the instrument rotates
360º around its standing axis. In this
way, PowerSearch scans the entire
horizon.
If a working area has been defined,
then PowerSearch is only active
within the defined limits.
Hz / V