Language, Local functions, continued, 26 operation – Leica Geosystems RCS1100 Series User Manual
Page 26
26
Operation
RCS1100-1.2.0en
5
Select the mode for the TPS1100
RCS Mode: The TPS1100 can be
operated in RCS mode.
GeoCOM: The TPS1100 can be
operated in GeoCOM
mode (transparent
mode).
OFF:
Switches off the
TPS1100.
Data may be lost if the
TPS1100 is switched off
during an application.
Select TPS1100 Mode
Local functions, continued
The choice of language is
valid only for the local
functions.
Select Language
Select the required language from
the list field.
RCS\ Set Language
Language
:
ENGLISH
CONT
MC
RCS\ Select TPS1100 Mode
Switch TPS1100:
RCS Mode
CONT
Configurations and settings
Keep the
key pressed down for
more than two seconds. The
available functions are displayed.
RCS\ Configuration
1 Select Language
2 Select TPS1100 Mode
3 Serial Interface
4 Configure Modem /TCPS26
5 Modem internal/external
6 GeoCOM RCS
CONT
INFO