Leica Geosystems RCS1100 Series - Manual (Page 39)

39
RCS1100-1.2.0en Safety directions
6
7
8
15
17
26
CAUTION:
Disturbances caused by
electromagnetic radiation
can cause faults in the transmission
of data.
Although the RCS1100 meets the
strict regulations and standards
which are in force in this connection,
Leica Geosystems cannot
completely exclude the possibility
that the RCS1100 may be disturbed
by very intense electromagnetic
radiation, for instance near radio
transmitters, 2 way radios, diesel
generators.
Precautions:
Check the plausibility of results
obtained under these conditions.
WARNING:
If the RCS1100 is operated
with cables attached at only
one of their two ends (e.g. external
power supply cables, interface
cables, etc.), the permitted level of
electromagnetic radiation may be
exceeded and the correct functioning
of other instruments may be
impaired.
Precautions:
While the RCS1100 is in use, cables
(e.g. instrument to external battery,
instrument to computer) must be
connected at both ends.
Electromagnetic acceptability, continued
CAUTION:
There is a risk that
disturbances may be caused
in other equipment if the RCS1100 is
used in conjunction with accessories
from other manufacturers (e.g. field
computers, personal computers, por-
table radios, non-standard cables,
external batteries).
Precautions:
Use the equipment only with
accessories from Leica Geosystems.
When combined with the RCS1100,
the strict requirements stipulated by
the guidelines and standards are
assured. When using computers and
2 way radios, pay attention to the
information provided by the
manufacturer regarding
electromagnetic acceptability.