Panasonic NV-J35 - Manual (Page 10)

SETTING THE TUNER IN THE VTR
f
The tuner in the VTR makes it possible to receive TV
broadcasts and to record these programmes without having
to turn on the TV set.
PROG
PRESET
pmasia
□ □
NE/NDRMAL
= *
nj q]
[ t r a c k i n g }
NEXT BAND/AFC
m □
O (2H-®
Preparation
• Turn the TV set on and select the programme position
(channel) which you have tuned to the video playback
channel.
• Press the VTR On/Off Switch to turn the VTR on,
• Set the VTR/TV Selector to “VTR".
PRE-PROGRAMMED TV CHANNELS (NV-J35A)
The local TV transmission channels 2, 7, 9 and 10 are
factory-preset in this VTR. That is, if you can receive
television broadcasts on VHF channels 2, 7, 9 and
10, these are already tuned on the programme
positions with the matching numbers.
However, it is possible to cancel these presettings
and tune the local TV broadcast channels on any
desired programme positions.
For alternative settings and tuning of additional TV
broadcasts channels, follow the Tuning Procedure
below.
Tuning Procedure
Q Press the Preset/Fine/Normal Button.
The indication on the Multi-Function Display changes
from the clock indication to the position indication.
^ Press the Channel Up or Down Button to select a pro­
gramme position (channel) which you want to tune to a
TV station.
^ Press the Band/AFC Button to select the “I", “111" or
“U” position.
VHF UHF
1 III U
NV-J35A 0-5 5A-11 21-69
NV-J35EA 1-3 4-11 21-69
The tuner in the VTR can be preset with up to 99 stations.
Q Press the or Button until the picture of the
desired station on your TV is satisfactory.
• If the “4-" or Button is pressed while pressing the
Next Button, the stations will change quickly.
1 J_. - PoJ j !“
^
; LI "'1-i
i • |il
G ■ Mi .
During the station search
(The position indication
flashes on and off.)
1 b
' [i;
Tuned condition
• The tuned station is automatically memorized.
Repeat steps for each channel you want to tune to a
station.
^ Press the Preset/Fine/Normal Button twice.
The indication on the Multi-Function Display changes
back to the previous indication.
Fine Tuning Procedure
If fine tuning is necessary, for example for a weak station ^
which is close to a strong station: ^
(T^ Press the Preset/Fine/Normal Button twice.
Press the “-f-” or Button to obtain the best tuning
condition.
• “AFC” Indicator will not be displayed.
►To return the tuning to its former state, press the Band/
AFC Button.
3) Press the Preset/Fine/Normal Button,
i10,>