Infra-red remote controller – Panasonic NV-J35 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INFRA-RED REMOTE CONTROLLER
^ VTR On/Off Button
^ Clock/Counter Selector
0 Reset Button
Q Record Buttons (•)
0 Pause/Still Button (I I)
0 Stop Button (■)
0 Rewind ◄◄/Review © Button
0
Slow Buttons
0 Mode Selector Cover
(D Time Search Button
0 Monitor Button
0 Programme Position (Channel) Selector Buttons
Fast Forward ►►/Cue © Button
0 Play/x2 Button (►)
0 Still Advance Button (!!►)
0
Reverse Play Button
0 Memory/Repeat/Search Button
0
VTR/TV Selector
Use as Digital Scanner
Slide the Mode Selector Cover downward.
(j) Bar Code Reader Display
0 Channel Display
0
Start Time Display
0 End Time Display
0
Check Indicator
Digital Scanner On/Off Button
Bar Code Reading Section
Transmit Button
When the Bar Codes Cannot Be Read
Although the lamp in the tip of the Bar Code Reading
Section lights up:
•No figures appear in the Bar Code Reader Display
•No beep sounds is heard;
The tip of the Bar Code Reading Section is probably
clogged with dirt.
Cleaning
(p Turn the Cap of the Bar Code Reading Section 90°
counterclockwise, as shown below.
Hole :^«!s.^Cap
and dust from
the hole of the Cap.
Gently wipe the tip of the lamp with a soft doth.
Lamp »Reattach the Cap and lock it
by turning it clockwise.
(6)