Panasonic KX-FP121NZ - Manual (Page 40)

1
Caller ID
Viewing the Caller ID list on the display
The unit stores the caller’s information and makes a list of up to 35 callers in chronological order.
When the memory Is full and the unit receives a new call, the oldest data will automatically be erased.
With the Caller ID list, the following convenient features are available.
— Viewing who has called you on the display (See below.)
— Dialling a telephone number from the list (p. 41)
— Storing a telephone number for automatic dialling from the list (p. 42)
— Printing out a Caller ID list (p. 114)
1
2
3
Press [CALLER ID SEARCH).
Example:
Display:
Rotate [EASY DIAL] to search the Caller ID list
(see below).
If you want to know the caller’s name and the
date/time of the call, press [NAME/TEL NO.]
repeatedly while the display is showing the desired
phone number.
• The display will alternate the number, date/time
and name by pressing [NAME/TEL NO.].
Note:
• If the caller’s name cannot be rSceived, the
following message will be displayed.
Display: NO NAME RCVD
Press [STOP] to exit the Caller ID list.
• The prefix “00” of an international phone
number will not be displayed.
Ex. When you search from the most recent call/oldest call
END OF NEW CALL
Note:
• To move between calls, rotate (EASY DIAL].
• The display will show “END OF NEW CALL” after the last new call in the list.
• The display will show “END” after the last call in the list.
• If the display shows “NO CALLER DATA” and a beep sounds, the Caller ID list is empty.
• Telecom does not currently send a NAME for Caller ID.
40