Panasonic KX-FP121NZ - Manual (Page 76)

Receiving Faxes
Pager cali
This feature allows your unit to call your pager when your unit receives a fax document or incoming voice
message.
1
2
3
4
5
6
Press (MENU].
Display;
Press ®,then SO.
1. SYSTEM SET UP
PAGER CALL
Press fSTART/SET/COPY].
MODE=OFF ▼A
Press ® or (5) fo select “ON”.
MODE=ON TA
• If this feature is not required, select "OFF”.
Press fSTART/SET/COPYi.
NO.=
Enter your pager number.
• You can enter a total of 46 digits and/or pauses.
Example:
1 202 555 1234PPP12345678PPP
Your pager
number Pauses
Your pager access
code, if required.
7 :
Press [START/SET/COPY].
The unit will dial the stored pager number.
PAGER TEST
8 Check that your pager receives a pager
test call.
g Press (DIGITALSP-PHONEI.
10 AUTO ANSWER light is off, turn it
I U
on by pressing [AUTO ANSWER.
How your unit and pager work
X
When your unit receives
a fax document or
incoming voice message,
it will call your pager
company.
u
A
Pager
company
Your pager
company will
call your pager.
Pager
Example:
Your unit received
a fax document.
A few minutes later, your pager will beep and
display as follows;
— "11”: when your unit received a voice message.
— “22”: when your unit received a fax document.
• If you subscribe to a Caller ID service and
the Caller ID information (telephone number) is
received, your pager will display the telephone
number before the number “11" or “22”.
76