Panasonic KX-FP121NZ - Manual (Page 93)

Skipping the greeting message
Press [o] during the greeting message playback.
• The unit will skip the rest of the greeting message.
Remojte Operation
Turning the message transfer on or off
You must pre-program a transfer telephone number
(p. 95) before using this feature.
Press IS [T] to turn ON the message transfer.
Press S S to turn OFF the message transfer.
if a transfer telephone number is not programmed, you
cannot turn this feature ON. The voice guide will
prompt you.
Voice guide exampie:
Message transfer is set.
Transfer phone number is 123456789.
Message transfer is o f f .
Transfer phone number is not set.
Turning the pager call on or off
You must pre-program a pager number (p. 76) before
using this feature.
Press S ® te turn ON the pager call.
Press S B to turn OFF the pager call.
• If a pager number Is not programmed, you cannot turn
this feature ON. The voice guide will prompt you.
Pager call is set.
Pager number is 098765432.
o ®
o 5'
(O
Changing the receive mode to the
TEL mode
Press S S to change the setting of the receive mode
from TAD/FAX to TEL.
• You cannot return to the TAD/FAX mode in the same
call. To return to the TAD/FAX mode, see below.
Returning the receive mode to the TAD/FAX mode
You can change the setting of the receive mode from TEL to TAD/FAX from a remote location.
1. Call your unit and wait for 15 rings.
• The answering device will temporarily answer the line.
2. Enter the remote operation ID during the greeting message.
• Your unit will switch to the TAD/FAX mode.
93