Erasing incoming messages from memory, Erasing a specific message, Erasing all messages – Panasonic KX-FP121NZ User Manual
Page 92: Other remote operations, Recording a marker message, Re-recording a greeting message, Rehibte operation, 3 s)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ReHibte Operation
Erasing incoming messages from memory
Erasing a specific message
Press
(3 S)
while listening to the message you want to
erase.
• A long beep and the voice guide will be heard.
The unit will then continue with the next message.
Erasing all messages
Press @ S to erase all messages.
• A long beep and the voice guide will be heard.
Voice guide example:
The message has been erased.
All messages have been erased.
Other remote operations
Recording a marker message
After playing back the recorded messages, you can leave
an additional message.
1. Wait for the voice guide to tell you that the remote
operation has ended.
2. Wait about 10 seconds for the voice guide to prompt
you to leave a message.
3. Leave a message after the beep.
All messages have been played.
Please leave your name and message
after the beep.
Re-recording a greeting message
You can change the contents of the greeting message for
the TAD/FAX mode.
1. Press [y] to start recording.
• A long beep will sound.
2. Speak clearly for up to 16 seconds.
• if you pause for over 2 seconds, 6 beeps will sound
and the recording will stop. Start again from step 1
within 10 seconds.
3. When finished, press 5].
• The new greeting message will be played.
92