Preparations, Press [dolby nr] and check nr*’ is displayed, Q press [rev mode] to select the reverse mode – Panasonic SC-DV150 User Manual
Page 36: Q tune in the desired station, Press [<] or [>] to start recording, To stop recording, To cut an unnecessary part while recording, To display the tape counter while recording
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Preparations:
© Press [c!)/l] to turn the unit on.
(i) The leader tape must be wound on beforehand. (■► page 36)
(3) Insert the tape to be recorded on into deck 2.
To record in Dolby B NR:
Press [DOLBY NR] and check NR*’ is dis
played.
Q Press [REV MODE] to select the reverse mode.
One side will record, then recording will stop
automatically.
cZy- Both sides will record (forward side->reverse side),
then recording will stop automatically.
Q Tune in the desired station.
(-► page 15)
J| Press [# REC PAUSE] to put the deck into the
recording standby mode.
The playback indicators
or “t>" will start flashing.
If you select in step Q, the direction wiil automatically
change to when you press [• REC PAUSE].
Press [<] or [>] to start recording.
t>: To begin recording from the forward side.
O: To begin recording from the reverse side.
To stop recording
Press [■].
To cut an unnecessary part while recording
© Press [• REC PAUSE].
The cassette deck will go into the recording standby mode.
© To resume recording, press [<l] or [O], whichever playback indi
cator is flashing.
To display the tape counter while recording
Press [COUNTER DISPLAY].
The tape counter will be displayed for approximately 5 seconds.
wt
C
■i
I
0)
I
o
pe
RQT5052