Panasonic NV-HS950AM - Manual (Page 30)

To record One TV Programme while
Viewing Another Programme
1 Refer to the manual recording operations steps 1 to 3.
2 Select the TV programme on your TV set you wish to
view at the present time.
To display the Approximate Remaining
Tape Time
1 Select Tape Length from On Screen Display and
select the corresponding cassette tape length.
See page 23.
On Screen Display
. BBS ^ laiiul
^ ^ ^ ^
System
One-Tciunh-Edit
TV Sysipm
Colour byalem
Remote
ON
DIMMED g-195
DECODER
HlFl-(^ORWAL
OFF
PAL
STORE: to store chani
◄ E-180: For E30, -60, -90, -120 and -180 tapes.
E-195; For El 95 tape.
E-240: For E240 tape.
E-260 ►: For E260 and -300 tapes.
2 Press DISPLAY.
DISPLAY
o
Clock^Counter-^Remaining Tape Time
•The remaining tape time may not be displayed
correctly depending on the tape used.
Recording of Stereo and Bilingual
Programmes
1 Recording is automatically made in the stereo or
bilingual mode. This prevents errors in the selection of
the dubbed or the original language.
2 During playback press AUDIO OUT to select the
desired sound mode. See page 8.
AUDIO OUT
o
Notes:
•When a video cassette with a broken off tab is inserted,
the “EET indication will flash to indicate that recording is
not possible.
•The recording pause mode will be automatically
released after 5 minutes, and be back to the stop mode.
The NICAM Broadcast System
NV-HS950 is equipped with the NICAM sound system
also.
NICAM is a 2 Channel sound broadcast system to provide
either a high quality stereo sound track or 2 independent
MONO sound tracks, Ml and M2.
NICAM programmes are always accompanied by
standard sound broadcasts and you can select the
desired sound with AUDIO OUT (See page 8) during
playback.
•The NICAM digital stereo sound can only be recorded on
the Hi-Fi audio track.
•To record the regular sound (ordinary normal sound) on
the FM audio tracks when a Stereo, Bilingual or NICAM
programme is received, select Mono ON during manual
tuning procedure. See page 18.
Important Note for the NICAM System
When NV-HS950 is switched on, the funerwill
automatically switch to a NICAM broadcast, if NICAM is
being transmitted. During test transmissions, it is possible
that the sound received doesn’t correspond to the picture
being viewed. In order to receive a synchronized sound
and picture, select monaural sound with AUDIO OUT (See
page 8) or Mono ON setting. This will only apply until
NICAM transmissions are fully operational.
Even if the sound track is in MONO, the stereo indicator
will appear.
30