Panasonic NV-HS950AM User Manual

Page 44

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

...... ........................ ............ ••• • ......................................................5 ■ ................. ......................:..... " . ........ !................... ......

■ ■ „ „ ::■■■ ■■VCR.Wiling <^nit^GprreiCtty,i , /

SYMPTOM

CAUSE

REMEDY

VCR display is not

illuminated.

Mains lead is not connected.

Reconnect mains lead to VCR.

VCR Display setting is OFF.

Set VCR Display to ON or DIMMED. See page 23.

VCR display is

illuminated but VCR

will not operate.

VCR is in timer mode.

Press TIMER REC to operate VCR manually.

Safety devices are operating.

Disconnect mains lead and wait for 1 minute.
Reconnect mains supply and check functions.

Dew may have formed.

When the dew indicator flashes, wait until this

indicator disappears.

VCR picture does

not appear on TV

screen.

The RF output channel is set
to ” {RFOFF).

Set the RF channel to a setting other than “—” {RF
OFF). See page 16.

piayljack will not

SYMPTOM

CAUSE

REMEDY

CHECKED

Picture noisy or not

in colour.
Horizontal bars or
lines run down the
screen.

Tracking is not correct.

Adjust the tracking. See page 9.

TV set is not tuned to VCR.

Tune the TV to your VCR. See page 16.

Video heads are clogged or
worn.

Consult your dealer for further advice.
See page 46.

44

Advertising