Panasonic NV-HS950AM - Manual (Page 9)

c:
o
9 RESET
To reset the tape counter (elapsed time) to “0:00.00”.
•The tape counter is automatically reset to “0:00.00"
when a video cassette is inserted.
10 Shuttle Ring
Operate after pressing the JOG/SHUTTLE button to
switch to the Jog/Shuttle mode.
To adjust piayback speed backward or fonward.
11 Jog Dial
Operate after pressing the JOG/SHUTTLE button to
switch to the Jog/Shuttle mode.
To locate any desired frame with utmost precision.
12 INDEX
For the index search function.
13 V (VCR), TRACKING/V-LOCK +/-
To select the required programme position (TV
station).
For tracking adjustment and vertical locking
adjustment
• For manual tracking adjustment
The - and + buttons are used to adjust the tracking
when, for example, noise bars on the picture are
better removed manually than by automatic digital
tracking controi.
Press both buttons together to return to automatic
digital tracking control.
• For slow tracking adjustment
When noise bars appear during still or slow
playback, switch over to slow playback and adjust
with the - or + button to reduce the noise bars.
• For vertical locking adjustment
Use the - and + buttons to minimize any vertical
jitter during still picture playback.
Adjustment is not possible when the TBC is working.
14 VCR/TV switch
VCR: Seiects the VCR operation mode.
TV; Selects the TV operation mode.
15 ZERO STOP
For the zero stop function.
16 REC/OTR
To start a recording.
For One Touch Recording.
17 ►► (FAST FORWARD)
In the stop mode: To fast forward the tape.
In the playback mode: To search forward.
In the fast forward mode: To obtain high speed
picture.
“>t>” is lit.
18 □(STOP)
To stop any playback or recording.
19 PAUSE/SLOW(ll/l»^)
During playback:
• By pressing:
Still picture. “ Q D ” is lit.
• By pressing for 2 seconds or more:
Slow piayback. “Dt>” is lit.
During recording: Interrupts recording.
20 TRANSMIT
To transmit the data that has been set on the remote
controiler to the VCR.
21 G-CODE
For the G-Code programming.
22 Numeric Buttons
To select VCR on the VCR/TV switch.
•To select the programme positions (1-99) of the
VCR.
9: (9)
19: 0 - (1) - (9)
•To programme a G-Code number.
23 No function
24 Infra-red Transmitter
The programming data are transmitted from here to
the VCR.
25 JOG/SHUTTLE ON display
While this dispiay is lit, the unit is set to the Jog/
Shuttle mode.
•Check that the display is lit before proceeding with a
jog or shuttle operation.
•The display is automatically turned off if no
operation is performed.
26 Timer Recording Operation Buttons
CH, DATE, ON, OFF
To programme a timer recording.
TIMER REC:
To turn the timer recording function on and off.
B is lit or not lit.
Once operating timer recording function, the normal
VCR operation is not possible unless this button is set
to off.
CHECK:
To check timer programmes.
CANCEL:
To cancel the settings made for a timer recording.
TRANSMIT:
To transmit the data that has been set on the remote
controller to the VCR.
27 AV LINK
To select the VCR mode or TV mode for AV LINK.
28 No function
C
O
CO
CD
Q