Panasonic NV-HS950AM - Manual (Page 5)

c
o
To select the required programme position (TV
station).
These buttons can also be used for tracking
adjustment and vertical locking adjustment.
See page 9.
(D REC/OTR
To start a recording.
For One-Touch Recording (OTR).
0 II (PAUSE/STILL)
In the stop mode: Still picture (Jog/Shuttle mode).
During playback:
•By pressing:
Still picture. “QD” is lit.
(Jog/Shuttle mode).
During recording: Interrupts recording.
■ (STOP)
To stop any playback or recording.
► (PLAY)
To start playback. “[>” is lit.
For the repeat playback function.
S-VIDEO IN (AV3)
To connect the S-Video cable to a movie camera or
to another VCR that has a S-Video output socket.
• If the S-Video cable is connected, other video input
(AV3) is automatically switched off.
<D
0
0
0
PHONES
To connect stereo headphones.
VIDEO IN (AV3)
To connect the video cable to a movie camera or to
another VCR.
0 MIC
To connect the microphone for recording. Once
connected, this socket has priority.
© SYNC/8mm
To connect the synchro connection cord {VW-K10E/
VW-K1E) to a movie camera or another VCR
equipped with synchronized editing capability.
To connect a movie camera or another VCR
equipped with LANC socket for One-Touch-Editing.
0 AV3 Selector
When Recording via the AV3 sockets on the front
panel or rear panel, set this switch to FRONT or
REAR.
0 Standby Indicator
This indicator is lit when the VCR is turned off or the
VCR is timer recording standby mode.
0 AUDIO DUB Indicator
This indicator is lit when the audio dubbing is
performed.
0 INSERT Indicator
This indicator is lit when the insert editing is
performed.
0 CVC Indicator
This indicator is lit when the power is ON.
0 Display
0 TIMER REC
To turn the timer recording function on and off.
ID is lit or not lit.
Once operating timer recording function, the normal
VCR operation is not possible unless this button is set
to off.
© COUNTER RESET
To reset the tape counter (elapsed time) to “0:00.00”.
•The tape counter is automatically reset to “0:00.00"
when a video cassette is inserted.
0 AUDIO DUB
To set up the VCR for audio dubbing.
0 INSERT
To set up the VCR for insert editing.
0 3DDNR
ON: Using the 3D DNR function, playback is
performed in the state which achieves
optimum picture quality in light of
characteristics of a tape.
•The 3D DNR indicator is lit.
•This control should normally be left in the
ON position.
•The 3D DNR function does not work during
NTSC playback.
OFF: Turn off the 3D DNR function.
•The 3D DNR indicator is not lit.
0 Jog Dial
To locate any desired frame with utmost precision.
0 Shuttle Ring
In the stop mode: To rewind or fast forward the tape.
In the playback mode:
To search picture backward or
forward.
In the still playback mode:
To adjust playback speed
backward or forward.
In the rewind or fast fonward mode:
To obtain high speed picture.
O
O)
CD
Q