Panasonic NV-HS950AM - Manual (Page 8)

Infra-red Remote Controller
24
VCR OPERATION
1 OSD
For the On Screen Display function.
2 AUDIO OUT
To select the desired sound mode.
At the every push of this button, the audio output
mode changes as follows.
Stereo-^Left^Right-^Normal audio--------------—
track
Set VCR/ 28
TV switch to
VCR for using
the numeric
buttons.
5 (REWIND)
In the stop mode;
In the playback mode:
In the rewind mode:
“OO” is lit.
6 VCR
To rewind the tape.
To search backward.
To obtain high speed picture.
The Left (L) and Right (R) Indicators shown which
sound mode is selected in the following way.
Stereo: Both the L and R Indicators appear.
Left: The L Indicator appears.
Right: The R Indicator appears.
Normal: Both the L and R Indicators don’t appear.
INPUT SELECT
To select the A1, A2 or A3 external recording source.
> (PLAY)
To start playback. “l>” is lit.
For the repeat playback function.
Press to switch the unit from on to standby mode or
vice versa. In standby mode, the unit is still
connected to the mains.
DISPLAY
To change the indication on the VCR Display or On
Screen Display.
Clocks Counter-^ Remaining Tape Time-
C
8 JOG/SHUTTLE
Press this to switch to the Jog/Shuttle mode and
cause JOG/SHUTTLE ON to appear on the remote
controller display. Press again to make JOG/
SHUTTLE ON disappear.
In the stop mode: Still picture (Jog/Shuttle mode).
During playback: Still picture (Jog/Shuttle mode).