Panasonic NV-HS950AM - Manual (Page 38)

Editing
Assembly Editing
This function can be used to make up an edited tape from
other recordings or video sources.
A new scene can be added to the end of a previous one.
Preparations
•Connect a Movie Camera or another VCR to this VCR
as shown.
• Insert a recorded cassette tape with an intact erasure
prevention tab.
•Select the video source required by pressing INPUT
SELECT to set A1, A2 or A3.
A1: Through the AV1 (TV) socket.
A2; Through the AV2 (DECODER/EXT) socket.
A3: Through the AV3 {AUDIO IN/VIDEO IN/S-VIDEO
IN) sockets.
Operations
A Press 11 (PAUSE/STILL) on the
I recording VCR.
2 Search for the end of the previous
recording.
Press REC/OTR to switch the VCR
from the pause mode to the recording
standby mode.
iOTR o
4 start the new recording by pressing II
(PAUSE/STILL) again.
Press ■ (STOP) to stop recording.
Note:
The new sound will be recorded on both the normal and
Hi-Fi sound tracks, only monaural sound recording is
possible on the normal sound tracks.
Recording VCR
It is possible to synchronize the playback start and stop of
the Movie Camera with the recording start and stop of this
VCR.
Preparations
•Connect a Movie Camera to this VCR with Synchro
Connection Cord (VW-K1E).
•Turn One-Touch-Edit to OFF before connecting the
Synchro Connection Cord. (See page 24.)
1 Put the VCR in the recording pause mode by pressing
REC/OTR and II (PAUSE/STILL).
2 Pul the Movie Camera in the still playback mode at the
point where you want to start editing.
3 Press 11 (PAUSE/STILL) on the VCR.
•The Movie Camera changes over to the playback
mode and the dubbing will start automatically.
Synchronized Editing between the VCRs
When editing from another VCR equipped with the
synchronized editing function, synchronized start and stop
of both VCRs can be activated from this VCR,
The operation is the same as described for synchronized
editing from a Movie Camera.
38