Remote control, O infrared window, 0 transmit indicator – Yamaha RX-V730 User Manual
Page 10: O standby, O system power, Input selector buttons, O display window, O level, Multi control section, Test
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONTROLS AND FUNCTIONS
Remote control
This section describes the remote control controls and
their functions. Make sure that the AMP mode is selected
before starting operation. See “REMOTE CONTROL
FEATURES” on pages 48 to 52.
O
Infrared window
Outputs infrared control signals. Aim this window at the
component you want to operate.
0
TRANSMIT indicator
Flashes while the remote control is sending signals.
O STANDBY
Sets this unit in the standby mode.
O SYSTEM POWER
Turns on the power of this unit.
0 №Ma
Sets the remote control to operate other components (not
necessarily connected to this unit) without changing this
unit’s input source.
@ Input selector buttons
Select the input source and set the remote control to
operate the selected source component.
o Display window
Shows the selected source component that you are
controlling.
O
LEVEL
Selects the effect speaker channel to be adjusted.
© Multi control section
Used when changing the setting and to implement the
settings.
® TEST
Outputs the test tone to adjust the speaker levels.
<D DSP program
Select DSP programs for the AMP position. Press a
button repeatedly to select a DSP program within that
group.
® RE-NAME
Used when changing the input source name in the display
window.
® CLEAR
Used when clearing functions acquired using the rename
features, and to set manufacturer codes.
© CODE SET
Used when setting up the manufacturer code (see page
49).
© SLEEP
Sets the sleep timer.
© 6CH INPUT
Selects the audio source connected to the 6CH INPUT
jacks.
6