Yamaha RX-V730 - Manual (Page 55)

REMOTE CONTROL FEATURES
Clearing renamed source names,
and setup manufacturer codes
11 Press an input selector button or [MMc] to
select the component control for which you
want to clear the name, function or
manufacturer code.
POWER SrmDBY SLEEP 6Ш1ШЧ1Т
Ш Ш □ О
(3 PHKMO о о о
V-AUX TUNER MD/CDfl
О О О О
D-TV/CBL VCR 1 VCR2/DVR DVD
О О О О
Press CLEAR by using a ballpoint pen or
similar object.
Note
• If you do not press any button within 30 seconds after step 2,
the clearing process is canceled. If this happens, start over from
step 1.
El Press /\ / V to select the clear mode.
The mode is shown in the display window in the
following order:
(L: name of a component) Clears
setup manufacturer code tor the
component control.
Clears all renamed source names
In the display window.
Clears all setup manufacturer
codes and renamed source
names. This returns to the factory
settings.
ET
Press and hold CLEAR again for about 3
seconds.
“C:OK” appears in the display window.
Note
• “C:NG” appears in the display window if the operation is
unsuccessful. In this case, start over from step 2.
lil Press CLEAR to exit from the clearing mode.
Note
• “ERROR” appears in the display window when pressing
buttons other than indicated in each step, or more than one
button at once.
2 о
m <
Л >
d о
О m
z D
51