Yamaha RX-V730 - Manual (Page 23)

CONNECTIONS
Connecting the power supply
cords
Turning on the power
(General model)
■ Connecting the AC power cord
Plug in this unit to the wall outlet.
■ AC OUTLETS (SWITCHED)
U.S.A., Canada, China, Europe, Singapore and
General models.............................................. 2 OUTLETS
U.K. and Australia model................................1 OUTLET
Use these outlets to connect the power cords from your
components to this unit. The power to the AC OUTLETS
is controlled by this unit’s STANDBY/ON (or SYSTEM
POWER and STANDBY). These outlets will supply
power to any source component connected to this unit
whenever this unit is turned on. The maximum power
(total power consumption of components) that can be
connected to the AC OUTLETS varies depending on the
area which it was purchasing.
China and General models.......................................50 W
Other models............................................................100 W
When all connections are complete, turn on the power of
this unit.
■D
JD
m
5
u
>
ii Press STANDBY/ON (SYSTEM POWER on
the remote control) to turn on the power of
this unit.
SYSTEM
POWER
Front panel Remote control
The level of the main volume, and then the current
DSP program name appear on the front panel
display.
^ Turn on the video monitor connected to this
unit.
■ VOLTAGE SELECTOR
(China and General models)
The VOLTAGE SELECTOR on the rear panel of this unit
must be set for your local main voltage BEFORE
plugging into the AC main supply. Voltages are 110/120/
220/240 V AC, 50/60 Hz.
19