Yamaha RX-V730 - Manual (Page 57)

ADJUSTING THE LEVEL OF THE EFFECT SPEAKERS
You can adjust the output level of each effect speaker
(center, rear left and right, rear center and subwoofer)
while listening to a source.
Adjustment should be made with the remote control.
n
Press AMP.
(While playing a source)
Press LEVEL repeatedly to select the
speaker(s) you want to adjust.
Each time you press LEVEL, the selected speaker
changes and appears on the front panel display as
follows: center, rear right, rear center, rear left and
subwoofer.
El Press < / > to adjust the speaker output level.
■ The control range for the center or rear left and
right speakers is from +10 dB to -10 dB.
■ The control range for the subwoofer is from 0 dB
to -20 dB.
Notes
• When the speaker output modes for “1A CENTER” and “1C
REAR LR” are set to NON, and “IE BASS” to MAIN, the
output level of those speakers cannot be adjusted because there
is no sound coming from these speakers.
• When you adjust the output level with LEVEL, the settings you
made with the test tone will be changed.
• We recommend adjusting the speakers by following the steps
described in “Using the test tone” on pages 22 and 23.
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is in the standby
mode. However, if the power cord is disconnected
from the AC outlet, or the power supply is cut for
more than one week, the stored data will be lost. If so,
set the output level again.
O >
TJ o
m 5
3J >
d o
O m
z o
r p kj T f” P Center speaker output level
JT.
i S 1 h‘‘
Rear right speaker output
level
p pi ? I "; J Rear center speaker output
level
_ o J K .
Rear left speaker output
level
■■H i'''i i Subwooter output level
\i/
• Once you press LEVEL, you can also select the speaker(s) to
be adjusted by pressing / y\.
53