Yamaha RX-V730 - Manual (Page 43)

SLEEP TIMER
Use this feature to automatically set this unit in the
standby mode after the amount of time you have set. The
sleep timer is useful when you are going to sleep while
this unit is playing or recording a source. The sleep timer
also automatically turns off the external component(s)
connected to AC OUTLET(S).
The sleep timer can only be set with the remote control.
\i/
• By connecting a commercially available timer to this unit, you
can also set a wake-up timer. Refer to the operation instructions
of the timer.
Canceling the sleep timer
■ Press SLEEP repeatedly until “SLEEP OFF”
appears on the front panel display.
After a few seconds, “SLEEP OFF’ disappears, the
“SLEEP” indicator goes off and the display returns
to the previous indication.
SLEEP
~ i". I r" r- l"i r'l r" r-
Setting the sleep timer
\i/
• The sleep timer setting can also be canceled by setting this unit
in the standby mode by using STANDBY on the remote control
(or STANDBY/ON on the front panel) or by disconnecting the
AC power cord from the AC outlet.
11 Select a source and start playback on the
source component.
^ Press SLEEP repeatedly
to set the amount of time.
Each time you press SLEEP,
the front panel display changes
as shown below.
I
-------> SLEEP 120 min ^ SLEEP 90 min -
SLEEP
SLEEP OFF ^ SLEEP 30 min ^ SLEEP 60 min <
M0/a>S TUNER 5__, PHONO
VOLUME
^■lllllllll
q j p p p ^ p ¡■■| .j 0 0
Ef The “SLEEP” indicator lights up on the front
panel display soon after the sleep timer has
been set.
The display then returns to the previous indication.
w : r 3/E№ VCB1 V-AL X EtTV/t®. D\«3 MD/CM TUNER , CD , PHONO
VOLUME
^^.illllllll
iospl r- n i- i r IT D T Li n i i 0 0
(PCIVII ............
39