Antenna/cable connection, Antenna connection, Procedure – Panasonic TU-DST50 User Manual
Page 11: Cable connection
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
mportant
N
otes
Antenna/Cable Connection
For proper reception, an antenna or cable connection is required.
Antenna Connection
For proper reception of VHF/UHF channels, a directional antenna is required {see
previous page). For best reception, an outdoor antenna is recommended.
Procedure
□
Connect the antenna cable from your antenna.
□
Select ANTENNA, in the Roller Guide Menu™* SET UP Menu under Input (see Getting
Started section. Step 7).
Incoming Cable from
Home Antenna
75 Ohm VHF/UHF
on back oJ STB
Cable Connection
Before connecting your cable to the STB, contact your local cable provider and ask
the following questions:
•
Is DTV available through your cable service?
•
What type of cable do you have? Standard Cable TV Signals (Cable STD), Harmonic Related
Carrier (Cable HRC) or Incremental Related Carrier (Cable IRC).
•
Do you need a separate cable box to receive DTV signals?
Procedure
□
Connect the cable wire provided by your local cable provider.
□
Select one of the following in the Roller Guide Menu^*^ SET UP Menu under Input (see
Getting Started section. Step 7).
•
Cable STD - Standard Cable TV Signals
•
Cable HRC - Harmonic Related Carrier
•
Cable IRC - Incremental Related Carrier
Incoming Cable from
Cable Provider
a\
75 Ohm VHF/UHF
on back of STB
Note:
The Panasonic DTV set-top box is able to receive DTV signals from your local cable
provider only if they are transmitted in the 8VSB modulation format approved by the
FCC for DTV transmission. Also, your cable provider may elect to transmit in the
8VSB format for only a limited period of time. Please contact your cable provider to
determine if 8VSB modulation is available.
* Roller Guide Menu is a trademark of Panasonic Consumer Electronics Company. U.S. Patent Pending.