Panasonic TU-DST50 - Manual (Page 40)

S pecial R emote B uttons
TVA/ideo
TV/VIDEO
O
Menu
The TV/VIDEO button allows you to select the mode of your TV. Each time the TV/
VIDEO button is pressed, the TV will cycle through Channel, Video 1, Video 2, Video 3
and DTV modes.
Note: Not all television models will display all the modes.
The MENU button allows you to access and exit the Roller Guide Menu. Each time
the MENU button is pressed, the Roller Guide will appear on and disappear from the
viewing screen.
Next Program ^
The PROG button allows you to select programs within a single 6 MHz channel. Each
time the PROG button is pressed, the STB will move to the next available program
within the channel.
Note: Only programs within the current 6 MHz channel can be selected using the PROG
button. If only one (1) program appears, it indicates only one (1) program is available.
Rapid Tuning
Recaii
The R-TUNE button quickly switches between two channels or programs. The STB
will attempt to immediately tune to the last channel or program in its memory. If
programs are no longer transmitting on the channel, the Unavailable Channel Screen
will display and the STB will automatically select the first program available on the
channel.
The RECALL button displays the Recall Screen for 6 seconds or until you press any
button (which automatically exits the Recall mode).
"Ml