Panasonic TU-DST50 - Manual (Page 30)

G etting S tarted
Step 8. Programming Available Channels
YOU MUST PERFORM THE AUTOMATIC CHANNEL PROGRAMMING BEFORE
MANUALLY ADDING AND DELETING CHANNELS BECAUSE OF THE DIGITAL
TUNING SYSTEM USED BY THE STB. THIS METHOD WILL ENSURE THAT
EVERY AVAILABLE CHANNEL IS CAPTURED AND STORED INTO MEMORY.
Automatic Channel Programming
The STB will scan for all available channels and store them in memory. The scan will
normally take several minutes to complete.
Procedure
□ In SET UP Menu, select PROGRAM to choose AUTO to automatically scan and store all
channels with a signal.
• Press the ACTION button to cancel or exit back to SET UP Menu.
Note: As more digital channels become available in your area, the AUTO
feature must be selected to store the new digital channels into memory.
Manual Channel Programming
After programming all available channels, you can use the MANUAL feature to
selectively add or delete channels.
Procedure
n In SET UP Menu, select PROGRAM to choose MANUAL to manually add or delete
channels.
• Use the ^ arrow buttons and numeric keypad to select a channel.
• Use the ^ and ^ arrow buttons to add and delete channels.
• Press the ACTION button to exit back to SET UP Menu.
The AUTO feature must be selected first to ensure that all
available channels are captured and stored into memory.
"Ml