Setup, Procedure, Panasonic – Panasonic TU-DST50 User Manual
Page 22: Ggjeahllh
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
G
etting
S
tarted
Step 3a. Digital TV/Standard TV Reception with DTV-Compatible TV
Follow this diagram if you have a DTV-compatible TV, no cable service and you want
to receive digital channels through the STB and standard channels through the TV. An
additional antenna may be required depending on which frequencies your current
antenna can receive.
NOTE;
ANTENNA, SPLITTER, RF CABLES
AND AUDIO CABLES NOT INCLUDED
DTV-Compatible TV
1 [
klj )ouij—^ |—1
[
audio
^L(g)
MAIN JTrf P.-W
p
.-W''
VIDEO^ ^ ^
® © ® @
R-AODIO-L VIDEO
MTSC OUTPUT
Panasonic!”
EMGtTAL TV DECODER
A!
WARMtiJC
M
m
ggjeaHllH
KflwntHT
uTtMHtr* (iicnc
CWVMATIM 0* AM MCA
DIGITAL TV/STANDARD TV RECEPTION WITH DTV-COMPATIBLE TV
SETUP
Procedure
•
Connect the antehna cable to a splitter.
•
Connect the splitter outputs to the STB and DTV-connpatible TV ANT (antenna) jacks using
standard RF cables with coaxial connectors.
•
Follow directions in Getting Started section to connect the STB to a DTV-compatible TV.
~m\