Panasonic OMNIVISION PV-8200 - Manual (Page 14)

On^TimeJ^C^^et^
^Important: If the remote control POWER, ACTION,
PROG, CHA/T , INDEX, or ADD/DLT
button does not work when pressed,
press the VCR button on the remote and
try the button again.
SET UP VCR
SET CLOCK
SET UP CHANNEL
1 Press ACTION to display
the menu.
2 Press AV to select
the language.
English: LANGUAGE
Spanish: IDIOMA
French: LANGUE
3 Press ^ repeatedly to change the language.
SELECT:* ▼ KEY
SET :► KEY
END : ACT I ON KEY
-------------- MENU------- 1
SET UP VCH
SET CLOCK
SET UP CHANNEL
iiamwaaiiiENi
SELECT:* T KEY
SET :► KEY
END :ACTION KEY
-------------- MENU ------
PREPARAR VCR
FIJAR RELOJ
FIJAR CANAL
MENU
!LANGUt/LANGUAGE
ELEGIR:* t
FIJAR ;P
TERMINAR:ACT I ON
REGLAGE MAGNETOSCOPE
REGLAGE HORLOGE
REGLAGE CANAL
FRANÇAIS
SEL. :* Y
REGLER:*
FIN : ACTION
4 Press ACTION to exit this mode.
To Add or Delete a Channel
1 Select a channel using the
NUMBERED keys to add
o r C H ^ V t o delete.
2 Press ADD/DLT to add
or delete the channel.
• To select a channel
once it's deleted,
use the NUMBERED keys
on the remote control.
To Replace Channels in Memory
In case you have cable installed, etc.
1 Press ACTION* to display
the menu.
Press AT to select “SET
UP CHANNEL," and then
press ► to display the
“SET UP CHANNEL” screen.
Press AT to select
“ANTENNA,” and then
press ► to set your antenna
system {TV or CABLE).
Press AT to select “AUTO
SET,” and then press ►
to display the “CHANNEL
CLOCK AUTO SET” screen.
• If you use a cable box, turn
it on and set it to the PBS
channel in your time zone.
• To exit this mode,
press ACTION twice.
Press CH A to start
Channel Auto Set.
---------- menu --------
SET UP CHANNEL
IDIOMA/LANGUE: ENGL ISH
SELECT:* ▼ KEY
SET :► KEY
END :ACTION KEY
------ SET UP CHANNEL ----
CABLE
AUTO SET
SELECT;* Y KEY
SET :► KEY
END :ACTION KEY
CHANNEL/aOCK AUTO SET
CONNECT ANTENNA CABLE
AND IF YOU USE A C/LBLE
BOX, TUNE IT TO YOUR
LOCAL PBS CH THEN, . .
PLEASE PUSH CH UP KEY
Clock Auto Set will be performed when channels are
replaced in memoiy. To cancel, press STOP when
“AUTO CLOCK S£ t PROCEEDING" appears on-screen.
To Set or Reset the Clock
In case the clock is wrong, or a power failure occurred.
1
Press ACTION to display
the menu.
2 Press AT to select “SET
CLOCK,” and then press ►
to display the “SET CLOCK”
screen.
3 Press AT to select
“MANUAL," and then press
► to display the SET
CLOCK screen.
4
Press AT and to select
and set the date, time, and
DST. (Daylight Saving Time).
5 Press ACTION twice to
start the clock and exit
this mode.
-------------- MENU---------- —
SET UP VCR
SET UP CHANNEL
ID lOMA/ LANGUE: ENGL I SH
--------- SET clcx : k ------------
AUTO CLOCK SET
WJMWJI
SELECT:* T KEY
SET :► KEY
END :ACT10N KEY
SET CLOCI^J^-^if
1/ 4/2000 TUE 12:
LHjia«àa!i.iiid
SELECT;* Y KEY
SET ► KEY
END :ACT ION KEY
For Auto Clock Set, select “AUTO CLOCK
SET," and then press CH A in step 3.
When Using the 100 key
When selecting CABLE channels 100 to 125 with the
NUMBERED keys, first press the 100 key and then
enter the remaining two digits.
For example, to select channel 125:
Press NUMBERED keys 100, then 2, then 5.
NOTES
This VCR will accurately maintain its calendar up to Dec. 31,2096,11:59PM.
Normal TV or Cable channels are automatically selected and placed in memory depending on how your
VCR is hooked up.
14