Using the multi-brand control, Vcr mode, Tv mode – Panasonic OMNIVISION PV-8200 User Manual
Page 25: Dss/cable mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the Multi-Brand Control
Once the remote control has been properly set up, you can select VCR, TV, or DSS/CABLE mode
depending on which functions you wish to control.
Press VCR or TV or DSS/CABLE on the remote control to select the desired mode.
(See below for the controllable functions of each mode.)
NOTE:
In TV or DSS/CABLE mode, it may be necessary to press ENTER after pressing NUMBERED
keys for channel selection.
VCR Mode
In VCR mode, the following
buttons are available.
VCR
All function buttons.
lY
VOL UP/DOWN
TV Mode
In TV mode, the following buttons are
available.
lY
POWER, INPUT, NUMBERED
keys. ENTER, CH UP/DOWN,
VOL UP/DOWN
VCR
VCR/TV, PLAY. STOP, FF, REW,
PAUSE, SLOW, REC, SPEED,
COUNTER RESET, ZERO/1 MIN.
DSS/CABLE Mode
In DSS/CABLE mode, the following
buttons are available.
DSS/CABLE
. POWER, NUMBERED keys,
ENTER, CH UP/DOWN
lY
VOL UP/DOWN
VCR
VCR/TV, PLAY, STOP, FF, REW,
PAUSE. SLOW, REC, SPEED.
COUNTER RESET, ZERO/1 MIN.
Some TV, Cable Box and DSS Box brands require you to turn on the power manually.
Not all functions listed may be controlled by this remote control.
25