Check list before you begin, 1 insert a cassette with record tab, Press ch a/tor numbered keys to select a channel – Panasonic OMNIVISION PV-8200 User Manual
Page 17: One touch timer recording (otr), Record one program while watching another, Selecting channels at the vcr, One touch recording (otr), Record on a tape, A/tor
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Record On a Tape
Check list before you begin.
D All connections are made.
(See pages 6~9.)
□ VCR is plugged in.
□ TV is turned on and set to the VCR
channel (CH 3 or 4).
1
Insert a cassette with record tab.
VCR power comes on automatically.
Press CH
A/Tor
NUMBERED
keys to select a channel.
• Or, press CHANNEL
AfW
on the VCR.
• Holding down CH
A/T
will increase
the channel search speed.
• To record from an outside source,
press CH
A/T
or INPUT to select
“LINE" (see page 23).
Press SPEED to change the
recording speed.
• SP = Standard Play ,
LP = Long Play
SLP = Super Long Play
(See page 5.)
4
Press REC/TIME on the remote control or VCR to
start recording,
• To edit out unwanted portions, press PAUSE to pause the
recording in progress.
To release, press PAUSE again.
(After the VCR has been in Pause mode for 5 minutes, it will
stop automatically to protect the tape and video head.)
One Touch Timer Recording (OTR)
The VCR starts recording and turns itself off at a preset time.
In step 4, press REC/TIME repeatedly to set the length of the
recording. Each press will change the stop time as shown.
c
^4:
Normal Ree—►0:30—♦•liOO
00 *^3:00-*—2:00
► 1:00-^
TIMER" lights in the Multi Function Display.
The remaining recording time can be displayed by pressing
DISPLAY in OTR mode.
5
Press STOP to stop recording.
• Or, press STOP/EJECT on the VCR.
Record One Program While Watching
Another
1
Press VCR/TV while recording is in progress to turn
off the VCR indicator in the Multi Function Display.
2
Use the TV channel controls to select a program.
The VCR will continue to record your program while
you watch any channel you choose.
• To switch back and forth between the recording and
viewing channel, press VCR/TV.
Selecting Channels at the VCR
1
Turn your TV and VCR on.
• VCR Indicator lights on the Multi Function Display.
If indicator doesn’t light, press VCR/TV to turn it on.
2 Use CH A/T on the remote control or VCR to
select channels.
• To switch back to TV channel selection, press
VCR/TV to turn VCR indicator off, or simply turn
the VCR power off.
17