Connections you’ll need to make, 3 select “line” input mode on the, To edit out unwanted parts – Panasonic OMNIVISION PV-8200 User Manual
Page 23: To monitor dubbing on your tv, Selecting the input mode, N cog^in^^ourl^lge^dub
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
^
[°n Cog^in^^ourl^lge^Dub^^
Connections you’ll need to make.
• When connecting to a normal VCR, use the L Audio In jack for proper sound reproduction.
Playing (Source) VCR
Recording (Editing) VCR
TV for Monitoring
1
Insert a pre-recorded
tape into the Playing
(Source) VCR.
g t)
L
i
"
lì
2
Insert a blank tape with y.
—
1
|
record tab into the
Li ^
±
Recording (Editing) VCR.
3
Select “LINE” Input mode on the
Recording (Editing) VCR. (See “Selecting
the Input Mode" at right.)
4
Press PLAY on the Playing VCR.
Press PAUSE at the desired starting point.
5
Press REC on the Recording VCR, and then
press PAUSE immediately thereafter.
6
Press PAUSE on both VCRs at the same
time, to begin copying.
To Edit Out Unwanted Parts
Press PAUSE on the recording VCR while copying is
in progress. Press PAUSE again to resume copying.
7
Press STOP on both VCRs to stop copying.
To Monitor Dubbing on Your TV
1
Turn your TV on and tune to the Recording
VCR channel (CH3 or CH4).
2
Set the VCR/TV Selector on the Recording
VCR to “VCR.”
Selecting the Input Mode
Press INPUT.
The display will change in the order below.
-►LINE-
r
Channel
Number
D
or
Press CH
A/W.
The display will change in the order below.
1
_
2 — 3
----
1 -
LINE-
(CABLE)
(TV)
—125 or 69
D
When LINE is selected, “L” is displayed in the Multi
Function Display for about 4 seconds.
Caution:
N
<
___
Unauthorized exchanging and/or
copying of copyrighted recordings
may be copyright infringement.
__
J
23