Panasonic OMNIVISION PV-8200 - Manual (Page 19)

STOP
Cancel a Timer Recording:
(Recording is in progress)
Press POWER and then STOP within 10 seconds to
cancel the timer recording.
• The TIMER indicator goes out in the Multi Function Display.
Replace Program Contents:
(Recording is not in progress)
1 Press PROG to display all currently
set programs.
2 Press
AT
and ► to.select and
set a program number.
(See page 18.)
3 Press AT and ◄►to select
and set replacement timer
information.
4 Press PROG twice to exit this mode.
P DT START STOP CH SPO
0 --------------:------------ —
2 0 10:OOP12:OOP125 SP
3 10 8:00P 9:00P 10 SP
4 SU 9:OOP10:OOP L ,LP
SELECT 1-0:* w KEY
ENTER :► KEY
END :PROG KEY
DfTEi. START STOP CH
8 SAT 10:OOP12:OOP 125
SELECT:* ▼ KEY
SET ► KEY '
END :PROG KEY■
Review or Clear Program Contents:
(Recording is not in progress)
1 Press PROG to display all currently
set programs.
2 Press
AT
to select “TIMER
PROGRAM," and then press ► to
display all currently set programs.
3 Press
AT
to select a program
number.
4 Press ADD/DLT if you want
to clear the program.
5
Press PROG to exit this mode.
P ■ DT- START— STOP CH - SI
2 0 10;00P12:0OP125 SP
3 10 8;00P 9;OOP 10 SP
4 SU 9:00P10:0OP L LP
CANCEL:ADO/DLT KEY
SELECT 1-8:* ▼ KEY
ENTER :► KEY
END :PR0G KEY
P DT
□ --
2 0
START STOP CH SPO
10 OOP12:OOP125 SP
3 10 a OOP 9:OOP10 SP
4 SU 9 OOP10:OOP L LP
SELECT1-0:* w KEY
ENTER p KEY
END PROG KEY
Timer Recording Using VCR Buttons
(Make sure a cassette tape is not Inserted in the VCR.)
1 Hold down STOP/EJECT and press REW to enter the Program mode.
2 Press FF or REC/TIME repeatedly or hold down to make selections.
3 Press PLAY to set the item and move on.
• To make corrections, repeatedly press PLAY to move the cursor to the right,
or REW to move to the left to the incorrect entry and make the correction.
4 Press STOP/EJECT and REW together to display program contents
after all items have been entered.
• You cannot clear programs with the VCR buttons.
5 Hold down STOP/EJECT and press REW, (release REW first, and
then release STOP/EJECT) to exit this mode.
6 Insert a cassette with record tab and press POWER off to set the timer.
19