Between antenna and vcr, Case 1: twin lead cable only, Case 1: screw & plug type terminal – Panasonic OMNIVISION PV-8200 User Manual
Page 7: Case 2: twin lead & coaxial cables, Case 3: double screw type terminal, Case 4: complex tv terminal, Between antenna and vcr between vcr and tv
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Between Antenna and VCR
Between VCR and TV
Case 1: Twin Lead Cable Only
To VCR Terminal
(Flat) Twin Lead
300 Ohm Cable
300-75 ohm T ransformer
(not supplied)
Case 1: Screw & Plug Type Terminal
UHFA/HF Band
Separator
(not supplied)
B)
RF Coaxial Cable
VHF
UHF
Case 2: Twin Lead & Coaxial Cables
(Round) 75 Ohm
coaxial Cable
UHFA/HF
Band Mixer
(not supplied)
D
To VCR Terminal
Case 3: Two Twin Lead Cables
(not supplied)
To VCR Terminal
If your TV has both post and plug-type VHF
terminals, the post connection is recommended to
minimi
2
e signal loss.
Case 2: Screw Type Terminal
TV
VHF
or
UHF
Case 3: Double Screw Type Terminal
TV
UHFA/HF Band
Separator
(not supplied)
VHF
UHF
Case 4: Complex TV Terminal
TERMINALS ON BACK OF TV SET
Connect to one of the ANT terminals and select the
same antenna number on the TV,