Cleaning the thermal recording head – Panasonic Panafax UF-650 User Manual
Page 106
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Cleaning the Thermal
Recording Head
If the received documents were blank, check the recording paper is set
correctly, (see page 2-5)
If the received documents were contained blank bands, the thermal
recording head is probably dirty and must be cleaned.
To clean the thermal recording head,
1. Open the RCV Cover t3y pressing down on the latch button on the right
side panel.
2.
Wipe the surface of the thermal head unit gently with a soft cloth or
gauze soaked with ethyl alcohol. Be sure to use a clean cloth since the
thermal head can be easily scratched.
Advertising