Panasonic Panafax UF-650 - Manual (Page 73)

4
-
4
.
INTERRUPT KEY
OPERATION
4. GEHING THE MOST OUT OF YOUR MACHINE
Using the INTERRUPT key
lor Transmission Reservation
NOTE
1. If you wish to transmit a document
without storing into the memory (On
Hook or Off Hook Dialling), in step
1, wait until current communication
is finished and display shows
“INTERRUPTED". Then follow the
On Hook or Off Hook Dialling
procedure.
2. When unit is executing interrupt file,
you can not use the INTERRUPT
key again until the interrupt file is
finished.
This unit wiii reserve for transmission or poliing up to 50 fiies. Then, the
files you reserved will be executed in sequence.
However, if you have a document which has to send as soon as possible,
use the INTERRUPT KEY and the following procedure.
The command you reserved will be executed when this unit has finished
the current communication.
After interrupt communication is completed, unit will return to original
sequence.
Unit is transmitting or
receiving.
INTERRUPT
"TT
fsee NOTE 1)
Place the document face down
on the ADF. Adjust Document
Guide.
Enter the station(s) from ariy
key.
Ex: One-Touch 01
^START
Yourmachine will
automatically store the
document into memoiy.
NX/hen finished transmitting or
receiving, your machine will
dial the numbers.
ON LINE * MEM.XMT *
ID:
ON LINE * MEM.XMT ^
INTERRUPT REQUEST
DOCUMENT SET
ENTER STATION(S) 05%
ONE-TOUCH STNS=001
<01> (Station name)
STORE * N0.025
PAGES=001 10%
* STORE * COMPLETED
TOTAL PAGES=002 15%
ON LINE * MEM. XMT *
ID:
COMPLETED
TOTAL PAGE(S) = 004/004
* DIALLING *
<01> (Station name}