Panasonic Panafax UF-650 - Manual (Page 60)

4
-
3
.
PROGRAMMED
4-3-1,
Setting Program Keys
Your machine has Four Special Program Keys. These keys are useful if
you frequently need to send or poll the same group of numbers. You can
use these keys to store a sequence of stations to be polled, a deferred
transmission or polling sequence, or Group Dialing.
In addition to above mentioned functions, these keys are also able to be
used for one of the One-Touch keys.
To set a number or a group of numbers in a Program key, follow the
procedure below.
/1 FUNCTtON
and
SET MODE (1 -5)
1;USER PARAMETER
SET MODE
3:PROGRAM KEYS
n-5)
PROGRAM KEY
Press one of the Program Keys,
PI to P4.
Ex: PI
PROGRAMtPI] NO.
1 :XMT/POLL 2:GROUP
Now you can choose one Program Key mode out of the
following five modes.
• Deferred Transmission
• Polling
• Deferred Polling
• Group Diailing Go to step 5a.
Go to step 5b.
Go to step 5c.
Go to step 5d.
NOTE
1. PROG means Programmed Com­
munications. ONE-TOUCH means
One-Touch Key Diailing.