Sending document by relayed transmission – Panasonic Panafax UF-650 User Manual
Page 126
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sending Document by
Relayed Transmission
Once you have recorded all the necessary parameters in your machine in
accordance with the Relay Network you belong to, you can send a
document to two or more stations in the network system, automatically,
using the procedure below. The operation is the same as Multistation
Transmission.
Place documents face down on
the ADF. Adjust the left and
right Document Guides.
Dial by pressing ar^
combination of One-Touch Key
or
ABBR
arxJ three-digit code.
Ex:
One-Touch Key 02 and
03
OSTART
Your machine will store the
document into memory then
dial the Relay Station
automatically.
After the transmission ends,
your machine prints out a
RELAY COMM. JOURMAL
automatically and returns to
standby.
After the Relay Station finishes
its transmission to the erxl
receiving stations, your
machine prints out a RELAY
XMT RESULT report sent back
by the Rel^ Station.
DOCUMENT SET
ENTER STATION(S) 00%
ONE-TOUCH
STNS=001
<02> (Station
name)
ONE-TOUCH
STNS=002
<03> (Station
name)
* STORE *
N0.015
PAGES=001
05%
* DIALLING *
<01 > (Station name)
* PRINTING *
COMM. JOURNAL
15-AUG-1990 15:00
00
%