How to poll, How to poll -3 – Panasonic Panafax UF-650 User Manual
Page 54
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How to Poll
NOTE
1 To erase or change the stations
setting in Step 5, press CLEAR. If
you recorded several, use A or T to
find the station you want clear.
Then press CLEAR. Add new sta
tions using Step 5 procedure.
2. If a polled station is busy, or does
not answer, it will be skipped and
the next station will be polled. The
skipped stations(s) will be redialled
up to five times after ail registered
stations have been polled.
3. You can verify that polling commu
nication was successful or not by a
communication Journal (see page
3-5).
The following procedure lets you poll one station, or multiple stations in
one operation.
FUNCTION
POLLING
(1-4)
1 :POLLING
POLLONG
PASSWORD=1234
Common Polling Password
Enter four-digit New
Password If necessary.
Ex: 5678
If you just press SET in Step 3,
the Polling Pasword will be
applied to a Common
Password.
POLLING
PASSWORD = 5678
Individual Polling Password
POLLING
ENTER STATION(S)
Enter station(s) by using;
• OneTouch Keys (Up to 28
stations)
• ABBR
and three-digit (Up
to 200 stations)
• Direct Dialing by pressing
SET
key (Up to 50 stations)
Ex:
One-Touch Key
01
ABBR
and
003
7772345
and
SET
<^ START
ONE-TOUCH
STNS=001
<01> (Station
name)
ABBR.
STNS=002
[003] (Station name)
TEL.NO.
STNS=003
7772345
* STORE *
N0.005
* DIALLING *
[003] (Station name)