How to erase or change program key settings, Botb – Panasonic UF-250 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How to Erase or Change Program Key Settings
To erase the settings in a Program Key, either completely or partially, and/or
add new numbers, or change the program name, use the following procedure.
and
MODE
CEZlIZiZ)
¿botb
repeatedly.
Press the key you want to erase or
change.
Ex: |P1 |.
(Press repeatedly)
If the key is a “Deferred” program,
use steps (6a) through (6d) below.
Ex: [lo1.
If not, skip to steps (6e) through (6i).
Ex:[H].
START TIME DS:00
[ 1 0 1 ( S t a t i o n n a m e )
C A L L E D
S T A T I O N S
[ P I ]
[ 3 2 ] ( S t a t i o n n a m e )
NOT€
When Deferred Communication program is used, first cancel the Deferred
Communication by the instructions on page 47 and 56, and then complete the
steps for canceling the Program Key Setting.
23