Error correction mode (ecm) – Panasonic UF-250 User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Error Correction Mode (ECM)
You can transmit documents free of errors by setting ECM to ON. In case
transmission speed is more important than reproduction quality of documents
being sent, you may set ECM to OFF. To set ECM to OFF,
0 1 - J A N - 1 9 8 8 1 5 : 0 0
ECM=ON
repeatedly.
0 1 - J A N - 1 9 8 8 , 1 5 : 0 0
ECMiOFF
To return to ECM=sON, press SELECT again.
You can now dial by pressing TEL/DIAL|and a full number,
a One-Touch key. I ABBWI and two digits, or fREblAlT
NOT€
After changing the ECM setting, you can
1. return to standby with | STOP |, or,
2. start a different series of settings by pressing
STAMP
U
HALF TONE
RESOLUTION
MODE L3H . or ¡FUNCTION
ORIGINAL
3. To change the preset ECM position, see page 26.
35