Halftone – Panasonic UF-250 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Halftone
The Halftone setting is useful when sending photos or illustrations with gray
tones. Your machine is preset with HALF TONE = OFF because a transmission
with halftone may take longer. To switch to HALF TONE = ON,
1
HALF TONE
0 1 - J A N - 1 9 8 8 1 5 : 0 0
HALF TONE=OFF
Your display should show HALF TONE = OFF.
0 1 - J A N - 1 9 8 8 1 5 : 0 0
HALF TONE=ON
In this case Resolution is automatically set at FINE and Original is limited to
NORMAL and PARK selections only. If you wish to go to HALF TONE = OFF,
again.
press HALF TONE
You can now dial by pressing
I
TEL/DIALI and a full number,
a One-Touch key, IABBR and two digits, or REDIAL
NOT€
After changing the Halftone setting, you can
1. return to standby with [STOP 1, or,
2. make a copy of the document to test the new Halftone setting by pressing
I COPY I. or.
3. start a different series of settings by pressing ORIGINAL , STAMP , MODE
rnm or I
FUNCTION
I ■
31