Panasonic UF-250 - Manual (Page 54)

I
RECEIVING DOCUMENTS
POLLING
How to Poll
The following procedure lets you poll one station, or up to 100 stations.
However, if you want to poll two or more stations, you must use One-Touch
dialing or Abbreviated dialing numbers.
Be sure to set the polling password before using the following procedure
(see page 16).
and
Dial by pressing a One-Touch key,
ABBRI and 2 digits, or ITEL/DIAL
and a full number.
Ex: IABBRI and [3][5], or
TEUDjAL|[71[7][I][I 3 4 5
POLLING
CALLED STATIONS
P O L L I N G
[351 (St a t i on name)
or
POLLING
7 7 7 2 3 4 5 |
To add more stations, use One-Touch
keys, or IABBRI and two digits.
Ex: One-Touch key | l 5 l
POLLING
[ 1 5 ] ( S t a t i o n name)
* D I A L I N G ♦
[ 3 5 ] ( S t a t i o n name)
NOTC
1. To erase or change stations set in steps 2 or 3, press | CLEAR I. If you recorded
several, use MODE | or | + (to find the station you want. Then press
CLEAR I. Add new stations with One-Touch keys, or | ABBR ] and two digits.
2. If a polled station is busy, or does not answer, it will be skipped and the next
station will be polled. The skipped station(s) will be redialed twice after all
registered stations have been polled.
3. When polling ends, a Multi-Station Communication Journal is automatically
printed out. This journal lists the stations polled and indicates whether polling
was successful or not.
52