Problem solving, Refilling and replacing the verification stamp – Panasonic UF-250 User Manual
Page 71
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Illl^
PROBLEM SOLVING
REFILLING AND REPLACING
THE VERIFICATION STAMP
The verification stamp contains ink. When the stamp appears faded or hard to
read, the stamp should be refilled \with ink or replaced.
1
.
Turn the power 0FF(O). Remove the ADF tray and stand the unit up, then
remove the Bottom Board Unit Screws, and open the Bottom Board Unit
towards you.
remove the Verification Stamp Unit, and refill the stamp by placing a few drops
of specified ink into it. Leave it a few minutes as it is, enough to spread ink.
Make sure that ink does not spill from the stamp even if it is upset, and reset
the stamp unit.
Advertising