For non-deferred programs – Panasonic UF-250 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
For Non-Deferred Programs:
6e
To erase the program key, press I CLEAR in step 4 (page 23) and then
press START
6f
To erase some of the stations, use MODE | - | and | +1 to find the
station you want, then press CLEAR
6o
To add new stations, use One-Touch keys or ABBR and two digits.
6h
To change stations, erase and add new numbers as explained above.
After step (6f), (6g) or (6h) is completed, press START .
6i
To change the program name, press START
I
repeatedly until
PROGRAM NAME is displayed, then write over the name and press
START
NOT€
n steps (6e), (6f), (6g), (6h) and (6i) above, you can return to standby by pressing
STOP . But, be sure to press | START | to store the new settings before pressing
STOP
25