When 2nd abbr. no. is set, When 2nd abbr. no. is not set, Transmission – Panasonic UF-250 User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TRANSMISSION
When 2nd ABBR. NO. is set,
3
q
If the number is busy, the machine will
automatically dial the 2nd ABBR. NO.
which you have already recorded
(Ex: 111 I). (See page 18.)
If the 2nd number is also busy, the machine
will wait three minutes and then automatically
redial the 1st number and 2nd number each
2 times in the same way.
* D I A L I N G *
[ 1 1 1 ( S t a t i o n n a m e )
W A I T I N G T O D I A L
[ 0 7 ] ( S t a t i o n n a m e )
When 2nd ABBR. NO. is not set,
3b
if the number is busy, the machine will
wait three minutes and then
automatically redial the same number.
If the line is still busy, the machine
will wait and redial one more time
automatically.
If no contact is made, the display will
show an information code (e.g.,
CODE = 630 Indicates the line was
busy).
W A I T I N G T O D I A L
[ 0 7 1 ( S t a t i o n n a m e )
INCOMPLETE
I N F O . CODE=630
NOT€
To redial a busy number, see page 43.
40