acidlab Robokop - Manual (Page 17)

17
Both shuffles can be applied simultaneously.
Each of the two shuffles can be adjusted over a range of 5 degrees.
To do so, press the Inst./Select and the Length/Shuffle buttons at the same
time.
The first 5 LEDs of the step buttons will now indicate the shuffle setting of the
first kind of shuffle.
LEDs 8-12 indicate the shuffle setting of the second kind of shuffle.
Keeping the Inst./Select and Length/Shuffle buttons held, you can now press
the corresponding Step buttons 1-5 or 8-12 to adjust the shuffle.
When shuffle is set to step 1 and step 8, no shuffle is present.
If the scale is changed, the shuffle settings return to the default setting
(no shuffle)!
Shuffle programming is the same as in Pattern Tap Write Mode
Track Play Mode
The memory of a new Robokop is empty and a track must first be
programmed!
A track is a sequence of different patterns from a pattern group.
Once you have programmed one of Tracks 1-12 in Track Write Mode, you can
use this mode to play the track back. Use the Pattern Group rotary switch to
select it.